Data logging and energy audits

Data loggers and energy audits for solar

Before we design anything, we log your site’s real electricity use for about a week. Your solar, inverter and battery sizes then come from facts, not guesses.

  • 5.0 on Google
  • 100+ installations
  • Sigenergy installer awards, 2024 & 2026
Orilla Solar power quality data logger connected at a main distribution board
An Orilla Solar data logger connected at a client’s main board
Why it matters

Your electricity bill doesn’t tell the whole story

A monthly bill shows a total. It doesn’t show when you use power, how high your peaks go or what runs at night. Those details decide what size system you need and how quickly it pays for itself.

Too big costs money

An oversized system means paying for panels and batteries that produce energy you can’t use or export, which stretches the payback.

Too small disappoints

An undersized inverter trips when motors, pumps or compressors start, and a small battery runs flat before the grid comes back.

Timing changes the savings

On time-of-use tariffs, a kilowatt-hour in the evening peak costs far more than one at midday. Knowing your load curve shows where solar and batteries save the most.

Demand charges add up

Many businesses and farms pay for their highest kVA peak as well as their kWh. Logging shows what causes those peaks and whether a battery can shave them.

Grid rules set limits

Grid-tied systems must fit your connection size and the NRS 097 rules your municipality or Eskom applies. Real data makes the registration application straightforward.

Backup must cover what matters

During grid outages you need to know exactly which loads the battery must carry and for how long. Logging measures that instead of estimating it.

Power quality meter with readings, connected by an Orilla Solar electrician wearing insulated gloves
Readings taken on site by the Orilla Solar team
What we measure

Every peak, every hour, for a full week

A professional power logger is clamped onto the incoming supply at your main distribution board. It records your site’s electricity use around the clock, weekdays and weekends, so the design reflects how you actually work.

  • kVA instant peaks: the highest load your site draws, including motor and pump start-ups
  • Base load: what keeps running at night and over weekends
  • Total kWh, and how much is used in daylight compared with at night
  • Load per phase, so the system can be balanced across a three-phase supply
  • Voltage, power factor and harmonics at the point of connection
From data to design

What the analysis tells us

Once the logger comes off, our engineers turn a week of readings into the numbers that decide your system.

Solar array size

How many kWp of panels your daytime load can use, so you aren’t paying for energy you can’t use.

Inverter size

An inverter that handles your real peaks and start-up surges, with headroom where it’s needed.

Battery size

Storage for night-time use, peak shaving and backup during grid outages, each sized from your load curve.

Savings and payback

A realistic savings estimate based on your tariff, which feeds the payback figure in your proposal.

The live data logging page lists the main items we analyse: kVA instant peaks, kVA base loads, total kWh, kWh used during the day versus at night, batteries for night-time use, and batteries for peak shaving and backup.

Ready when you are

Tell us about your site and we’ll arrange a logger and a proposal built on your real usage.

Industrial area with many warehouse roofs covered in solar panels

One week of data

Twenty-five years of the right system

How it works

From booking to proposal

Logging is the first practical step in every Orilla Solar business and farm project, and in larger homes and farmhouses.

Desk calendar with a date circled next to an electricity bill, with a solar factory roof outside the window
Step 1

Book a date

We agree a suitable date and time with you, and ask for a recent electricity bill and your tariff.

Power quality data logger with current clamps fitted inside an open main distribution board
Step 2

Install the logger

Our team installs the logger safely at your main distribution board. Your power stays on.

Data logger recording inside a distribution board cabinet at dusk, with a solar roof outside
Step 3

Log for about a week

The logger records your use for about seven days, covering a normal working week and a weekend.

Data logger in its carry case connected to a laptop showing a week of electricity use
Step 4

Remove and download

We collect the logger and download the data for analysis.

Engineer’s desk with a load profile chart and a rooftop solar layout on two screens
Step 5

Analyse and design

Our engineers study your load profile and design the system around it.

Printed solar proposal with savings and payback charts on a boardroom table
Step 6

Proposal and quote

You receive a detailed proposal and quotation showing system size, savings and payback, with the reasoning behind each number.

On site

Our data logging work

Real photos of Orilla Solar engineers and electricians logging client sites.

Orilla Solar electrician in insulated gloves fitting a data logger inside a distribution board
Fitting a logger at the main board
Current clamps of an Orilla Solar data logger installed in a distribution board
Current clamps on the incoming supply
Orilla Solar branded data logger case on site
Orilla Solar’s logging kit
Who it’s for

Every site where size and payback matter

Business park building with a large solar array across its roof
Businesses

Factories, warehouses and offices

Demand charges, time-of-use tariffs and three-phase loads make logging essential.

Commercial solar page
Rows of ground-mounted solar panels on a farm
Farms

Pumps, cold rooms and packsheds

Big motor start-ups and seasonal loads need careful sizing. We log the points that matter on your farm.

Farm solar page
Farmhouse with solar panels across its roof
Larger homes and farmhouses

Pools, workshops and home offices

Where the load is large or unusual, a week of logging gets the battery and backup right.

Home solar page

Tariffs are rising and getting more complex

NERSA approved an average Eskom increase of 8.76% for direct customers from 1 April 2026 and 9.01% for municipalities from 1 July 2026. Many commercial and farm tariffs also charge for peak demand and price energy by time of day and season.

  • Time-of-use: peak, standard and off-peak rates, with higher prices in the winter high-demand season
  • Demand charges: billed on your highest kVA in the month
  • Fixed and network charges that solar can’t remove, so savings must be modelled honestly

Grid connection and registration

A grid-tied system must be registered with your municipality or Eskom as small-scale embedded generation (SSEG) and meet the NRS 097-2 standards. These limit system size and export relative to your connection, so your logged demand and supply size matter from the start.

  • System sized within your connection and the utility’s limits
  • Certificate of Compliance from our Installation Electrician
  • SSEG application handled for you. We also make existing systems compliant
Wouter Zonnestein, CEO and engineer at Orilla Solar, standing in front of a distribution board
Wouter Zonnestein, CEO and engineer
Engineer-led

Designed by engineers who read the data themselves

Orilla Solar is led by Wouter Zonnestein, an engineer who studied at Stellenbosch University. Our engineers analyse every logging report in-house and design the system from it. No outsourced guesswork.

  • Installation Electrician on staff and a CoC on every installation
  • Health and safety file for every project
  • Public liability and project insurance
  • PV GreenCard accredited
Meet the team
100+

installations completed by Orilla Solar

5.0

rating on Google from our clients

Recognised by Sigenergy with installer awards in 2024 and 2026

Where we log

Gauteng and the surrounding provinces

Our teams log sites anywhere in Gauteng plus Limpopo, North West, Mpumalanga and the Free State.

  • Gauteng
  • Limpopo
  • North West
  • Mpumalanga
  • Free State
FAQ

Data logging questions, answered

What happens on site, how long it takes and what you get.

What is data logging?
Data logging records your site’s electricity use over a set period with a professional power logger. It captures your peaks, base load and when you use power, so a solar system can be sized from real data rather than estimates.
Why do I need data logging before installing solar?
How long does data logging take?
Will my power be switched off during installation?
Where is the logger installed?
What does the logger measure?
Who is data logging for?
Does data logging cost anything?
What do I receive afterwards?
Can data logging help reduce my demand charges?
Does logging help with municipal or Eskom registration?
Which areas do you cover?
Next step

Start with the data

Tell us about your site and send a recent electricity bill. We’ll book a logging date and design a system around how you actually use power.