Orilla Solar
Sungrow solar inverters and batteries, sized from your own data
Sungrow makes high-quality hybrid inverters and batteries for homes, and battery systems and string inverters for businesses and farms. Orilla Solar designs, installs and looks after them.
- 5.0 on Google
- 100+ installations
- Sigenergy installer awards, 2024 & 2026

A long-standing inverter maker with a full range
Sungrow has been in the South African market since 2017 and supplies everything from home hybrid inverters to commercial battery storage. That makes it a strong fit when one brand needs to cover a whole site.
Two home options
Premium SH hybrids with SBH high-voltage batteries, or the more affordable MG-RL hybrids with MBL low-voltage batteries.
Stackable LFP batteries
SBH high-voltage batteries in 5 kWh modules, or 16 kWh MBL low-voltage batteries, all lithium iron phosphate, so storage can grow later.
Grid-tie string inverters
The CX range from 25 kW to 150 kW for business and farm roofs, with up to 98.8% maximum efficiency on the SG150CX datasheet.
Complete business storage
PowerKeeper modular systems and liquid-cooled PowerStack cabinets of 257 kWh or 514 kWh for businesses and farms.
Built for harsh sites
IP65 home hybrids and IP66 / C5 commercial inverters, rated for dust, water and corrosion.
iSolarCloud monitoring
Solar, battery, load and grid on the iSolarCloud app and web portal, with fault alerts.
Two options for homes
Each option is a complete system: a hybrid inverter and the battery made for it. We recommend one after looking at your bills and load profile.

SH hybrid inverter + SBH battery
Inverter: SH6.0RS, SH8.0RS or SH10RS for single-phase homes, or SH15T or SH25T for three-phase homes and farmhouses. The SH-T has a built-in 63 A bypass for whole-home backup and 100% unbalanced output.
Battery: SBH high-voltage LFP in 5 kWh modules, with up to 25 kWh per stack on SH-RS and up to 40 kWh on SH-T, and up to four equal stacks in parallel.
See the numbers for this system ↓
MG-RL hybrid inverter + MBL battery
Inverter: MG-RL single-phase low-voltage hybrids up to 12 kW (MG12RL), with a 0 ms switch to backup on the MG12RL datasheet.
Battery: MBL low-voltage LFP battery (MBL160, 16 kWh per unit), for indoor installation. A lower-cost way into a Sungrow home system.
See the numbers for this system ↓Three options for businesses and farms
Complete battery systems and solar-only grid-tie inverters, sized from your load data.

PowerKeeper complete system
Sungrow’s modular C&I system: the SH125CX 125 kW hybrid inverter plus ST050CF battery stacks of about 50 kWh each, up to 250 kWh per inverter.
See the numbers for this system ↓
PowerStack 257 kWh or 514 kWh
Liquid-cooled cabinets with their own 125 kW converter: ST255CS-2H (257 kWh) or ST510CS-4H (514 kWh), on-grid, off-grid or switching automatically.
See the numbers for this system ↓
SG CX string inverters
Solar-only three-phase string inverters: SG25–50CX-P2, SG125CX-P2 and SG150CX, for commercial roofs and ground mounts up to 150 kW per inverter.
See the numbers for this system ↓Product details are from Sungrow’s published datasheets and product pages and can change. Datasheets open from Sungrow’s own website. We confirm the exact models in your proposal.
Tell us about your site and we’ll size the right Sungrow system from your own usage data.

The latest from Sungrow
Sungrow brought its SH125CX commercial hybrid and PowerStack 255CS to South Africa at its Johannesburg C&I summit in November 2025, and PowerKeeper is now available here too. On the home side, the MG-RL low-voltage hybrids give a more affordable route into Sungrow.
- PowerKeeper: a complete C&I system. ST050CF battery stacks (49.9 kWh, IP66 / C5) pair with the SH125CX, up to 250 kWh per inverter, with a built-in ATS for switching to backup in 10 ms or less
- SH125CX, 125 kW commercial hybrid: solar and battery in one inverter, 10 MPPTs, up to 250 kWp PV, 100% three-phase unbalanced output
- PowerStack 514 kWh (ST510CS-4H): the larger liquid-cooled PowerStack cabinet, at 125 kW
- MG12RL, single phase: 12 kW low-voltage hybrid for MBL batteries, 4 ms backup switch time, 63 A bypass for whole-home backup
From Sungrow’s announcements and datasheets. Ask us which models suit your site.

See what your system is doing
Sungrow’s iSolarCloud app and web portal show solar production, battery level, consumption and grid use, live and over time. The home hybrids refresh data every 10 seconds and can run an online I-V curve scan to spot a weak string.
- Live energy flow and history on app and web
- Fault alerts and remote diagnostics
- Backup reserve and charging settings set up for you
- We monitor the systems we install and follow up on alarms
See maintenance and monitoring for how we look after systems after installation.
Sungrow on video
One short film per system, from Sungrow’s official YouTube channel. They play only when you press play.
Videos by Sungrow. They are not Orilla Solar installations.
Pick the one closest to you
Eight ways a Sungrow system is put together, from a flat to a factory. Open yours for what goes in, the numbers that matter and the datasheets. Your proposal lists the exact equipment for your site.
1Homes and small premises · premiumSH hybrid inverter + SBH battery · Single phase · 6 kW – 10 kW
Typical sites
Houses, townhouses, small offices and shops on a normal single-phase supply, with a high-voltage battery that can be mounted outdoors.
What goes in
- SH6.0RS, SH8.0RS or SH10RS · 6 kW – 10 kW
- Single-phase hybrid inverter with a backup output for your essential circuits. The SH8.0RS and SH10RS take up to 20 kWp of panels and run up to 14.5 kW of backup load.
- SBH battery · 10 kWh – 25 kWh
- High-voltage LFP battery built in 5 kWh modules, 2 to 5 per stack on these inverters. Add modules later.
Key numbers
- Power
- 6 kW – 10 kW
- Usable battery
- 10 kWh – 25 kWh (5 kWh modules)
- Backup switchover
- Under 10 ms
- Outdoor rating
- IP65 inverter; IP55 battery
- Solar input
- 2 MPPTs (SH6.0RS) or 4 MPPTs (SH8.0RS, SH10RS)
DatasheetsSH6.0RS · SH8.0/10RS · SBH battery
Get a home solar quote2Homes and small premises · more affordableMG12RL hybrid inverter + MBL battery · Single phase · 12 kW
Typical sites
The same houses, townhouses, small offices and shops as the premium option, at a lower price. The inverter is low-voltage (48 V) and the battery goes indoors.
What goes in
- MG12RL · 12 kW single phase
- Low-voltage (48 V) hybrid inverter with 3 MPPTs for up to 24 kWp of panels and a 63 A bypass for the whole house.
- MBL160 battery · 16 kWh per unit
- LFP rack battery, 2 to 20 units in parallel (up to 320 kWh). Indoor only.
Key numbers
- Power
- 12 kW
- Battery
- 16.08 kWh per unit (nominal), 2 to 20 units
- Backup switchover
- 4 ms; 63 A bypass
- Rating
- IP65 inverter; battery indoors (IP20)
- Efficiency
- Up to 97.6%
DatasheetsMG12RL · MBL160 battery
Get a home solar quote3Larger homes, farmhouses and small to medium businessesThree phase · 15 kW – 200 kW
Typical sites
Large homes, farmhouses, guesthouses, offices, workshops and packhouses on a three-phase supply, from one inverter up to eight in parallel.
What goes in
- SH15T or SH25T · 15 kW or 25 kW three phase
- Three-phase hybrid inverter with a built-in 63 A bypass, so the whole premises can be backed up. Full output on one phase if the loads are unbalanced. Up to 8 SH25T in parallel for 200 kW.
- SBH battery · 10 kWh – 160 kWh per inverter
- 5 kWh modules, 2 to 8 per unit (10 kWh – 40 kWh), and up to 4 units per inverter.
Key numbers
- Power
- 15 kW – 200 kW (up to 8 inverters in parallel)
- Usable battery
- 10 kWh – 160 kWh per inverter
- Backup switchover
- Under 10 ms; 63 A bypass; 100% unbalanced output
- Outdoor rating
- IP65 / C5 inverter; IP55 battery
- Efficiency
- Up to 98.2%
DatasheetsSH15/20/25T · SBH battery
Get a quote for this size4Larger businesses and farms · modularPowerKeeper: hybrid inverter + battery stacks · 125 kW – multi-MW, 50 kWh – 1 MWh per inverter
Typical sites
Factories, cold stores, packhouses, large farms, retail centres, mines and estates that need serious storage for backup, peak shaving or time-of-use savings. Choose PowerKeeper when the solar and the battery are going in together: the SH125CX hybrid takes the panels directly, and the storage grows in 50 kWh steps from one stack to megawatts.
What goes in
- SH125CX commercial hybrid · 125 kW
- Solar and battery in one three-phase inverter: 10 MPPTs for up to 250 kWp of panels, 125 kW charge and discharge, full output on one phase, 150% overload for 10 seconds.
- PowerKeeper ST050CF stacks · 49.9 kWh – 249.6 kWh each
- Outdoor LFP battery stacks of 1 to 5 modules. Through the SJC160-02 junction box one inverter takes up to 4 stacks (about 1 MWh), and inverters run in parallel for bigger sites.
- Metering and monitoring
- DTSU666-20 energy meter and Logger1000 for iSolarCloud.
Key numbers
- Power
- 125 kW per inverter; inverters in parallel to multi-MW
- Usable battery
- 49.9 kWh – 249.6 kWh per stack, up to 4 stacks (about 1 MWh) per inverter; 0 – 100% depth of discharge
- Backup switchover
- 10 ms or less; 100% unbalanced output
- Outdoor rating
- IP66 / C5 inverter and stacks
- Efficiency
- Up to 98.6%
DatasheetsSH125CX · PowerKeeper ST050CF
Get a quote for this size5Larger businesses and farms · cabinetPowerStack: all-in-one battery cabinets · 125 kW, 257 kWh or 514 kWh per cabinet
Typical sites
The same sites as PowerKeeper. Choose PowerStack when you want the battery and its power conversion delivered as one pre-built, liquid-cooled cabinet: bigger blocks (257 kWh or 514 kWh at a time) and a smaller footprint per kWh. PowerStack is AC-coupled: it has no solar input of its own, so it is the natural fit where solar is already installed. To add solar, we pair it with the SG CX grid-tied inverters in the next row.
What goes in
- PowerStack ST255CS-2H · 125 kW / 257 kWh
- One liquid-cooled cabinet with the battery and the 125 kW power conversion built in. Runs on-grid, off-grid or switches automatically.
- PowerStack ST510CS-4H · 125 kW / 514 kWh
- The larger cabinet: twice the storage behind the same 125 kW, for longer backup or bigger daily cycles.
- Safety built in
- Three-level fire protection with aerosol suppression, gas, smoke and heat detectors, and cell-level monitoring.
- Solar with PowerStack
- AC-coupled, so the panels go on separate SG CX grid-tied inverters (see Solar only), new or existing. The cabinet charges from them through the site’s switchboard.
Key numbers
- Power
- 125 kW per cabinet; up to 25 cabinets on-grid or 10 off-grid
- Battery
- 257 kWh or 514 kWh per cabinet, 0 – 100% depth of discharge
- Backup
- On-grid, off-grid and automatic switching; 100% unbalanced load
- Outdoor rating
- IP55, C4 (C5 optional); 65 dB or less at 1 m
- Footprint
- 1.15 m or 2.15 m wide, 2.45 m – 2.47 m high, 1.61 m deep
DatasheetsST255CS-2H · ST510CS-4H
Get a quote for this size6Solar only, no batteriesGrid-tied string inverters · 25 kW – 150 kW per inverter
Typical sites
Daytime-heavy businesses and farms that want to cut the bill without storage, or add batteries later.
What goes in
- SG25CX-P2 to SG50CX-P2 · 25 kW – 50 kW
- Three-phase string inverters with 3 or 4 MPPTs, for smaller roofs or spread across a big one.
- SG125CX-P2 · 125 kW
- 12 MPPTs and 98.5% efficiency for larger roofs and ground mounts.
- SG150CX · 150 kW
- 7 MPPTs, up to 210 kWp of panels and 98.8% efficiency.
- As many as the site needs
- Inverters run in parallel on a Logger1000, all on iSolarCloud.
Key numbers
- Power
- 25 kW – 150 kW per inverter
- Efficiency
- Up to 98.8%
- Outdoor rating
- IP66 / C5
- Safety
- Arc-fault detection, DC Type I+II and AC Type II surge protection, PID recovery
DatasheetsSG25/30/33CX-P2 · SG36/40/50CX-P2 · SG125CX-P2 · SG150CX
Get a quote for this size7The iSolarCloud appMonitoring, control and cheaper power from your phone
What you see and control
- Live energy flows
- Solar, battery, grid and loads on one screen, with history by day, month and year, on the app or in a browser.
- Backup reserve
- Set how much battery is always held back for an outage; the system uses the rest for savings.
- One platform for every size
- The same iSolarCloud account covers a single home inverter, a string of SG CX inverters on a Logger1000, or a PowerKeeper or PowerStack site.
- Remote care
- Alerts and fault records, with remote parameter changes and updates, so Orilla Solar can check and fix most things without a site visit.
How it lowers the bill
- Self-consumption mode
- Solar runs the premises first, the surplus fills the battery, and the battery carries the evening. The grid is the last resort.
- Time-of-use charging: buy low, use high
- On a time-of-use tariff the inverter charges the battery from the grid in the cheap off-peak hours and runs the premises on battery through the expensive peak. The charge and discharge windows are set once in the app and repeat every day, which also covers winter when solar is short.
- Peak shaving for businesses
- On PowerKeeper and PowerStack sites the battery caps the demand drawn from the grid, cutting the maximum-demand charge on a commercial tariff.
- Export control
- Zero-export where the municipality requires it, or feed surplus in where a feed-in tariff is on offer.
8Warranty10-year warranty; swap-out on home systems
What Sungrow covers
- Inverters: home hybrid inverters carry a 10-year swap-out warranty. Commercial inverters carry 5 years as standard, and every Orilla Solar quote includes Sungrow’s 5-year extension, so you get 10 years in practice (extensions are available up to 25 years in total). Registering the system with Sungrow within 6 months of installation adds 3 months.
- Batteries: SBH and PowerKeeper batteries carry a 10-year warranty on their datasheets. MBL160 and PowerStack cover follows Sungrow’s warranty letter for that product, which we supply with your proposal.
- Remedy: Sungrow repairs or replaces the faulty unit, with the balance of the original warranty carried over (and at least a year on the replacement).
What you need to know
- Register it
- Orilla Solar registers your system with Sungrow after commissioning.
- Near the coast
- Standard cover does not apply within 2 km of the sea and is limited to 2 years at 2 km – 5 km unless the C5 enclosure version is used.
- Not covered
- Lightning and surge damage, improper installation, unauthorised repairs, salt mist or corrosion, cosmetic wear, fuses and surge arresters.
- Claims
- Orilla Solar lodges and manages the claim with Sungrow for you.
Figures from Sungrow’s datasheets and manufacturer warranty, checked November 2026. Battery capacities are usable energy unless marked nominal.

Sungrow, installed properly
Good equipment still needs the right design

The brand follows the design, not the other way round
We start with your bills and, where it helps, data logging, so we know your real load profile, peaks and what has to stay on in a grid outage. Then we choose the equipment. Sungrow is often the right answer for larger three-phase homes, commercial roofs and sites that need serious battery storage.
- CoC sign-off and PV GreenCard accreditation
- Eskom or municipal SSEG registration handled for you
- Our own installation electrician on staff
- 10-year Sungrow manufacturer warranty on SH hybrid inverters and SBH batteries, claimed through us
- We take over and maintain existing Sungrow systems too
Sigenergy is our primary brand, and Sigenergy recognised our work with installer awards in 2024 and 2026. See our Sigenergy page.
Photo: Sungrow hybrid project at Kyto Farm, Upington (image: Sungrow). Not an Orilla Solar installation.
Sungrow for every kind of site
Homes and farmhouses
Premium SH-RS single-phase or SH-T three-phase hybrids with SBH batteries, or the more affordable MG-RL with MBL batteries, for essentials or whole-home backup, pool and borehole pumps.
Businesses and farms
PowerKeeper and PowerStack storage, the SH125CX hybrid and CX grid-tie string inverters for factories, warehouses, packsheds and pumps, from 50 kW, across Gauteng, Limpopo, North West, Mpumalanga and the Free State.
From your bill to a working Sungrow system
- 1
Share your bills
Send recent electricity bills and tell us what must stay on.
- 2
Measure and visit
Data logging where it helps, and a site visit to check the roof, board and placement.
- 3
Design and proposal
The right inverter, battery and layout, with costs, savings and payback.
- 4
Install and commission
Neat installation, commissioning in iSolarCloud, CoC and registration.
- 5
Monitor and maintain
We monitor and service every system we install.
Sungrow questions, answered
Straight answers on the equipment and how we use it.
Orilla Solar
See what a Sungrow system would look like for you
Send us your electricity bills and tell us what you want to keep running. We’ll design the right system and show you what it costs and should save.