Installer and resellerOrilla Solar
Sigenergy solar and battery systems, designed and installed by engineers
Sigenergy puts the inverter, battery, energy management and EV charging in one modular system. Orilla Solar designs, installs and looks after Sigenergy systems for homes, businesses and farms.
- 5.0 on Google
- 100+ installations
- Sigenergy installer awards, 2024 & 2026

One manufacturer, one system, one app
Many systems are a mix of brands that don’t always talk to each other. Sigenergy designs the inverter, battery and energy management together, which makes for a neater, safer and more expandable installation.
Modular and stackable
Battery modules stack on the energy controller. Start with what you need and add modules later.
Built for outdoors
SigenStor, SigenStor Neo and SigenStack are rated IP66, so they can stand outside without a separate enclosure or container.
Seamless backup
With a Sigen Gateway, the switch to backup in a grid outage is rated at 0 ms on Sigenergy’s datasheets.
EV charging
A DC charging module on SigenStor, or a Sigen EV AC charger, charges an electric car from solar and battery.
Monitored in one app
Solar, battery, home and grid in the mySigen app, with remote firmware updates.
Long warranty
A 10-year Sigenergy manufacturer warranty on the Sigenergy products we sell, subject to Sigenergy’s terms.
Two premium systems for homes
Both are complete, premium Sigenergy systems: energy controller, stackable batteries and the mySigen app. SigenStor Neo is the newest, with the gateway built in, and the one we recommend for most new homes. SigenStor is the established system. We confirm the right fit after looking at your bills and load profile.

SigenStor Neo
Sigenergy’s newest home system, new to South Africa, with the gateway built in.
Energy controller: SigenStor Neo EC from 2.5 kW to 12 kW single phase, or 3 kW to 15 kW three phase, with the backup function built in, so most homes need no separate gateway. Rated 0 ms load-side disruption and a 63 A grid-to-load passthrough on Sigenergy’s datasheet.
Battery: SigenStor Neo BAT modules, one to six per controller, with a built-in optimiser in each pack so new and older modules can be mixed later.

SigenStor
The established Sigenergy home system you may have seen on other installs, paired with a Sigen Gateway.
Energy controller: SigenStor EC from 5 kW to 12 kW single phase, or 12 kW to 30 kW three phase, with the solar inverter, battery converter and energy management in one unit. Up to twice the rated output for 10 seconds for pumps and motors.
Battery: SigenStor BAT 6.0 and BAT 10.0 LFP modules (6.02 kWh and 9.04 kWh), one to six stacked per controller. An EV DC charging module can be added to the stack.
Backup: a Sigen Gateway Home or HomePro gives a 0 ms switch to backup on Sigenergy’s datasheets.
See the numbers for this systemThree options for businesses and farms
Battery systems, solar-only grid-tie inverters and parallel SigenStor for smaller sites, sized from your load data.

SigenStack with Sigen C&I hybrid
SigenStack BAT 12.0 modules (12.06 kWh), four to seven per stack and up to 21 per inverter (253 kWh), on a Sigen C&I hybrid inverter of 50 kW to 125 kW. Several inverters link through a Sigen commercial gateway for backup and larger sites.
See the numbers for this system
Sigen PV grid-tie inverters
Sigen PV string inverters of 50 kW, 110 kW and 125 kW for businesses and farms that want grid-tie solar without batteries, with a built-in EMS and IP66 rating.

SigenStor in parallel
For shops, offices, farmhouses and smaller sites, several SigenStor units can run in parallel to reach the power and storage needed, with the same app and modules as a home system.
See the numbers for this systemProduct details are from Sigenergy’s published datasheets and can change. We confirm the exact models in your proposal. Product images: Sigenergy.
Tell us about your site and we’ll design the right Sigenergy system from your own usage data.
Charge your car from your own solar
Sigenergy chargers work with the rest of the system, so the car can charge from solar and battery and be managed in the same app.

Sigen EV DC charging module
12 kW or 25 kW DC charging with a CCS2 plug, built into the SigenStor stack and fed directly from solar and battery.

Sigen EV AC charger
7 kW, 11 kW or 22 kW Type 2 wall chargers, with a cable or a socket, managed in the mySigen app.

Your energy, on your phone
The mySigen app shows what your panels are producing, what your home or business is using, the battery level and what you’re drawing from the grid, live and over time.
- Live energy flow and history
- Backup reserve and charging settings set up for you
- Remote firmware updates from Sigenergy
- We monitor your system too, and follow up on alarms
Keep the system online. Sigenergy’s warranty asks for an internet connection so firmware can be updated. See maintenance and monitoring.
Sigenergy on video
One short film per system, from Sigenergy’s official YouTube channel. They play only when you press play.
Videos by Sigenergy. The projects shown are Sigenergy case studies, not Orilla Solar installations.
Pick the one closest to you
Eight ways a Sigenergy system is put together, from a flat to a factory. Open yours for what goes in, the numbers that matter and the datasheets. Your proposal lists the exact equipment for your site.
1Homes and small premisesSingle phase · 6 kW – 12 kW
Typical sites
Houses, townhouses, small offices and shops on a normal single-phase supply.
What goes in
- SigenStor Neo · 6 kW – 10 kW
- Inverter and battery in one tower, backup switch built in, 63 A Smart Port for a generator or smart load. Up to 3 units in parallel.
- SigenStor · 6 kW – 12 kW
- Inverter and battery tower, with a Gateway Home SP 12K or HomePro SP-F for backup.
- Battery modules
- 1 to 6 stacked per tower; add more later.
Key numbers
- Power
- 6 kW – 12 kW
- Usable battery
- Neo 6.02 kWh or 7.52 kWh per module; SigenStor 5.84 kWh or 8.76 kWh per module; 6 kWh – 53 kWh per tower
- Backup switchover
- 0 ms; 63 A grid passthrough
- Outdoor rating
- IP66
- EV charging
- Sigen EVAC on either; EVDC module on SigenStor
DatasheetsSigenStor Neo EC · SigenStor EC · SigenStor BAT · Gateway Home · Gateway HomePro
Get a home solar quote2Larger homes, farmhouses and small businessesThree phase · 12 kW – 60 kW
Typical sites
Large homes, farmhouses, guesthouses, offices and workshops on a three-phase supply.
What goes in
- SigenStor Neo · 12 kW – 15 kW three phase
- Backup built in; up to 3 units in parallel without a gateway.
- SigenStor · 15 kW – 30 kW three phase
- With a Gateway Home TP 30K for one unit, or Gateway C60-2 for two units (60 kW).
- Battery modules
- 1 to 6 stacked per tower.
Key numbers
- Power
- 12 kW – 60 kW
- Usable battery
- 6 kWh – 108 kWh
- Backup switchover
- 0 ms; generator port on the gateway
- Outdoor rating
- IP66
- Scale
- 1 to 3 Neo, or 1 to 2 SigenStor on a C60-2
DatasheetsSigenStor Neo EC · SigenStor EC · Gateway Home · Gateway C60-2 to C1200
Get a quote for this size3Medium businesses and farmsSigenStor units in parallel · 60 kW – 600 kW
Typical sites
Packhouses, pump stations, lodges, retail centres, workshops and factories that want the whole site backed up.
What goes in
- SigenStor · 30 kW three-phase towers
- In parallel, each with up to 6 battery modules.
- Sigen Gateway C60-2 to C600
- One per site, named for its power and the number of towers it takes: C60-2, C120-6, C180-9, C300-12, C600.
- Generator and smart loads
- Connected and controlled through the gateway.
Key numbers
- Power
- 60 kW – 600 kW
- Usable battery
- Up to 1.6 MWh (30 towers)
- Backup switchover
- 0 ms; 350 ms anti-backflow
- Outdoor rating
- IP66 towers; gateway IP54 (wall) or IP20 (indoor cabinet)
- Scale
- 2 to 30 SigenStor towers on one gateway
DatasheetsSigenStor EC · SigenStor BAT · Gateway C60-2 to C1200
Get a quote for this size4Large businesses and farmsSigenStack battery systems · 50 kW – 2.4 MW
Typical sites
Factories, cold stores, large farms, mines and estates that need serious storage for backup, peak shaving or time-of-use savings.
What goes in
- Sigen C&I hybrid inverter (HYB) · 50 kW, 110 kW or 125 kW
- 0 ms backup switchover; 150% overload for 10 seconds.
- SigenStack battery
- 12.06 kWh modules, 4 to 21 per battery controller (48 kWh – 253 kWh), up to 7 per stack. The CMB-4 combiner joins up to 4 controllers to one inverter.
- Sigen Gateway C300-B to C2400-B
- Puts several inverters on one backup bus: C300-B, C600-B, C1200-B, then modular cabinets to 2.4 MW.
- Add capacity later
- Sigenergy recommends adding modules within 12 months of first installation so new and old packs match.
Key numbers
- Power
- 50 kW – 2.4 MW
- Battery
- 48 kWh – 1 MWh per inverter
- Backup switchover
- 0 ms; 150% overload for 10 s
- Outdoor rating
- IP66 inverters and stacks, with aerosol fire suppression per stack
- Scale
- Up to 20 inverters on a C1200-B; cabinets beyond that
DatasheetsC&I hybrid 50–125 kW · SigenStack · Sigen Gateway
Get a quote for this size5Solar only, no batteriesGrid-tied inverters · 50 kW – multi-MW
Typical sites
Daytime-heavy businesses and farms that want to cut the bill without storage, or add batteries later.
What goes in
- Sigen PV · 50 kW and 125 kW
- String inverters, as many as the roof or ground mount needs.
- Built-in energy management
- Up to 100 inverters in parallel without a separate data logger.
- mySigen monitoring
- The same app and alerts as the battery systems.
Key numbers
- Power
- 50 kW – multi-MW
- Efficiency
- Up to 98.6%
- Outdoor rating
- IP66
- Safety
- Arc-fault detection, Type II surge protection
- Scale
- Up to 100 inverters in parallel
DatasheetsSigen PV 50–125 kW
Get a quote for this size6Charging an electric carFrom your own solar
What goes in
- SigenStor EVDC · 12.5 kW or 25 kW
- DC charging module that slots into a SigenStor tower (uses one of the six module positions). CCS2 plug.
- Sigen EVAC · 7 kW, 11 kW or 22 kW
- AC wall charger for SigenStor or SigenStor Neo, with solar-surplus charging and scheduling in the app.
- Third-party AC chargers
- Can be fitted to either system.
Key numbers
- DC charging
- 12.5 kW or 25 kW (SigenStor)
- AC charging
- 7 kW, 11 kW or 22 kW
- Control
- mySigen app: solar-only mode, schedules, load management
- Outdoor rating
- IP66 (EVDC), IP65 (EVAC)
DatasheetsSigenStor EVDC · Sigen EVAC 7/11/22
7The mySigen appControl, automation and cheaper power from your phone
What you see and control
- Live energy flows
- Solar, battery, grid, home and car on one screen, with history by day, month and year and the rand value of what you saved.
- Backup reserve
- Set how much battery is always held back for an outage; the system runs the rest for savings.
- Smart loads and generator
- Switch a geyser, pool pump or charger by time, battery level or solar surplus; start and stop a generator through the Smart Port or gateway.
- Remote care
- Alerts, fault records and firmware updates over the air, so Orilla Solar can check and fix most things without a site visit.
How it lowers the bill
- Self-use mode
- Solar runs the premises first, the surplus fills the battery, and the battery carries the evening. The grid is the last resort.
- Time-of-use mode: buy low, use high
- On a time-of-use tariff the app charges the battery from the grid in the cheap off-peak hours and runs the premises on battery through the expensive peak. You set the tariff windows once; it does this every day, and in winter when solar is short.
- AI mode
- Forecasts tomorrow’s solar from the weather and your usage from history, then plans the charging and discharging around your tariff on its own.
- Export control
- Zero-export where the municipality requires it, or sell surplus where a feed-in tariff is on offer.
8Warranty10-year swap-out warranty
What Sigenergy covers
- Homes: SigenStor and SigenStor Neo towers (inverter and battery modules) carry a 10-year product warranty, with a battery performance guarantee of at least 60% usable energy at 10 years or the warranted throughput (20.44 MWh per BAT 6.0, 30.66 MWh per BAT 10.0), whichever comes first. EV DC modules: 3 years.
- Businesses: Sigen C&I inverters, SigenStack batteries and battery controllers get 5 years as standard, extended automatically to 10 years while the system stays connected to Sigen Cloud. Inverter cover can be bought up to 15 years in the first year. Gateways: 2 years.
- Remedy: Sigenergy repairs by software or parts, or replaces the unit with a new or refurbished equivalent. The warranty moves to a new owner if the system stays at the same address.
What you need to do
- Keep it online
- Home systems offline for more than 90 days enter safe mode; more than a year offline in total cuts the warranty to 5 years. Business systems need Sigen Cloud for the 10-year cover.
- Claim within 30 days
- Claims go through the mySigen app; Orilla Solar lodges and manages them for you.
- Not covered
- Lightning, surge and storm damage, improper installation, unauthorised repairs, cosmetic wear.
- Installer
- Must be installed by a trained installer; Orilla Solar is a Sigenergy-recognised installer.
Figures from Sigenergy’s datasheets and product notices, checked November 2026. Capacities are usable energy.

Sigenergy, installed properly
The equipment is only as good as the installation
Recognised by Sigenergy in 2024 and 2026
Sigenergy is our primary platform, and Sigenergy recognised our work with installer awards in 2024 and 2026. We design every system from your own data and stay with it after the install.
Designed from your data
Bills, and data logging before design, so the battery and inverter fit how you really use power.
Qualified team
Installation Electrician on staff, CoC sign-off and PV GreenCard accreditation.
Registration handled
Eskom or municipal registration and the Certificate of Compliance done for you.
Warranty claims handled
Sigenergy gives a 10-year manufacturer warranty on its products. We handle any claim with Sigenergy for you.
2024 & 2026 Sigenergy Awards. Orilla Solar has been recognised by Sigenergy with installer awards in 2024 and 2026.
Sigenergy is our primary brand. We are also experienced with Sungrow, Deye and Dyness when a site suits them better.
Sigenergy for every kind of site
Homes and farmhouses
Whole-home or essentials backup, pool and borehole pumps, home offices and EV charging, in one neat tower. Done across South Africa, including Cape Town.
Businesses and farms
SigenStack battery systems, Sigen PV grid-tie and parallel SigenStor for factories, warehouses, packsheds and pumps, from 50 kW, across Gauteng, Limpopo, North West, Mpumalanga and the Free State.
From your bill to a working Sigenergy system
- 1
Share your bills
Send recent electricity bills and tell us what must stay on.
- 2
Measure and visit
Data logging where it helps, and a site visit to check the roof, board and placement.
- 3
Design and proposal
The right SigenStor or SigenStack set-up, with costs, savings and payback.
- 4
Install and commission
Neat installation, commissioning in the Sigenergy platform, CoC and registration.
- 5
Monitor and maintain
We monitor and service every system we install.
Sigenergy questions, answered
Straight answers on the equipment, warranty and what it costs to run.
Installer and resellerOrilla Solar
See what a Sigenergy system would look like for you
Send us your electricity bills and tell us what you want to keep running. We’ll design the right Sigenergy system and show you what it costs and should save.